Products

Stainless Steel Diaphragm Control Valve

It consists of two main assemblies: valve body assembly and actuator assembly (or actuator system), which are divided into four series: single-seat series control valve, double-seat series control valve, sleeve series control valve and self-operated Type series control valve. Variations of the four types of valves can lead to many different applicable configurations, each with its own specific applications, features, advantages and disadvantages. While some control valves are used in a wider range of applications than others, control valves are not suitable for all applications to work together to create the best solution for enhanced performance and reduced cost.

view more

Ductile Iron Balancing Valve

The balance valve is a valve with special functions. There is no special feature of the valve itself, only the difference between the use function and the place. In some industries, due to the large pressure difference or flow difference of the medium (various types of flowable substances) in various parts of the pipeline or container, in order to reduce or balance the difference, the corresponding pipeline or container A valve is installed to adjust the relative balance of the pressure on both sides, or to achieve a balance of flow through the method of shunt, the valve is called a balance valve.

view more

Spring full lift steam safety valve

The safety valve is a special valve that the opening and closing parts are in a normally closed state under the action of external force.Safety valves are automatic valves, mainly used in boilers, pressure vessels and pipelines. The control pressure does not exceed the specified value, which plays an important role in protecting personal safety and equipment operation. Safety valves must be pressure tested before they can be used.

view more

Stainless Steel Plug Valve

A plug valve is a valve that uses a plug body with a through hole as an opening and closing member. The plug body rotates with the valve stem to realize the opening and closing action. Since the movement between the sealing surfaces of the plug valve has a wiping effect, it can completely prevent contact wit

view more

200X Type Pressure Relief Valve

Pressure reducing valve is generally divided into diaphragm type and piston type，nominal diameter≤DN500 is diaphragm type，more than DN600 type is piston，both working principle is similar，this is valve by the main valve 2, pilot valve 1, needle valve 5, ball valve 3 and a pressure gauge4.Pressure reducing valve main control of the main valveof the fixed outlet pressure， the main valve outlet pressure does not change due to changes in the inlet pressure, apply to industrial water supply, water, fire water supply and water pipeline system for domestic use.

view more

PVC Ball Valve

The PVC ball valve is mainly used to cut off or connect the medium in the pipeline, and can also be used for the regulation and control of the fluid. Compared with other valves, it has the following advantages. 1. Small fluid resistance, ball valve is the smallest fluid resistance among all valves, even the reduced diameter ball valve, its fluid resistance is quite small. The UPVC ball valve is a new material ball valve product developed according to the needs of various corrosive pipeline fluids. Product advantages: light weight valve body, strong corrosion resistance, compact and beautiful appearance, light weight and easy installation, strong corrosion resistance, wide application range, hygienic and non-toxic materials, wear resistance, easy disassembly, simple and easy maintenance .

view more

Lift Check Valve

Lift check valve refers to a valve that automatically opens and closes the valve flap by relying on the flow of the medium itself to prevent the backflow of the medium, also known as check valve, one-way valve, reverse flow valve, and back pressure valve. The check valve is an automatic valve whose main function is to prevent the backflow of the medium, the reverse rotation of the pump and the driving motor, and the discharge of the medium in the container.

view more

Single Plate Check Valve

Single plate check valve is one of the most commonly used structural forms of check valve. It has the advantages of simple structure, small volume and small resistance loss. Therefore, it is widely used in fluid process system.

view more

Ball Check Valve

1.Ball check valve is a check valve with multi ball, multi channel and multi cone inverted fluid structure. It is mainly composed of front and rear valve bodies, rubber balls and cone bodies. 2.The ball makes short stroke rolling in the ball cover to realize the opening and closing of the valve.

view more

Rubber Disc Check Valve

1.The rubber disc is made of steel plate, steel rod and reinforced nylon cloth, and the outer layer is covered with rubber. The service life of the valve flap can reach 1 million times. 2.It adopts full flow area design, with the characteristics of small head loss, not easy to accumulate sundries, simple maintenance and so on. 3.It is generally suitable for clean media, not for media containing solid particles and high viscosity.

view more

Vertical Lift Check Valve

Check valve is an automatic valve, also known as check valve, one-way valve, return valve or isolation valve. The medium flows in from the inlet end (lower side) and flows out from the outlet end (upper side). When the inlet pressure is greater than the disc weight and its flow resistance, the valve is opened. On the contrary, the valve will be closed when the medium flows back.

view more

Soft Seal Gate Valve

DN200 PN16 3 inch 8 inch 32mm 40mm Cast i\Iron Flange Type Soft Seal Gate Valve A gate valve controls the media's flow by lifting the gate (open) and lowering the gate (closed). A gate valve's distinct feature is the straight-through unobstructed passageway, which induces minimal pressure loss over the valve.

view more

Z41H Carbon steel gate valve

ANSI API600 10 inch 80mm DN100 PN16 Soft Seated Z41H Carbon Steel WCB Gate Valve Gate valve is a widely used valve, which is sealed by contacting the valve seat and gate. Usually, the sealing surface will be overlaid with metal materials to increase wear resistance.It can only be fully opened and closed, not adjusted or throttled. There are rigid gate and elastic gate, according to the different gate, gate valve is divided into rigid gate valve and elastic gate valve.

view more

Brass Flange Ball Valve

1.The chemical composition & physical properties meets the requirement of natiaonal standard And send Testing Report to customers when shipment. 2.All valve body & parts are processed by CNC machine tools for ensuring product precision. 3.Every piece workblank must be tested by QC. Those defected workblank returns to bake again . 4.All products use petroleum and anti-rust oil to clean under high pressure before assembling works. Also clean the inside medium after pressure testing and the inner chamber cleanliness is up to the standard of GB/T7748 . 5.Every piece valve makes pressure testing as per national standard before shipment. Any defected goods prohibit to ship for client.

view more

Manual rising stem gate valve

What is rising stem gate valve? Rising-stem valves are those valve designs that are operated by pushing or pulling the valve stem. The valve stems do not rotate, thus the valve stems are threaded and matched to a stem nut that converts the rotational output motion of the motor actuator to linear movement of the valve stem.

view more

Large Diameter non-rising stem gate valve

A gate valve is generally used to completely shut off fluid flow or, in the fully open position, provide full flow in a pipeline. Thus it is used either in the fully closed or fully open positions

view more

Brass Threaded Ball Valve

1.The chemical composition & physical properties meets the requirement of natiaonal standard And send Testing Report to customers when shipment. 2.All valve body & parts are processed by CNC machine tools for ensuring product precision. 3.Every piece workblank must be tested by QC. Those defected workblank returns to bake again. 4.All products use petroleum and anti-rust oil to clean under high pressure before assembling works. Also clean the inside medium after pressure testing and the inner chamber cleanliness is up to the standard of GB/T7748. 5.Every piece valve makes pressure testing as per national standard before shipment. Any defected goods prohibit to ship for client.

view more

Wafer Butterfly Valve With handle

2inch 4inch Soft Seat EPDM Manual Wafer Cast Iron DI Butterfly Valve With Handle Lever Butterfly valve, is a simple structure of the control valve, can be used for the low pressure pipeline medium switch control of butterfly valve is to close the disc, rotating around the valve shaft to achieve the opening and closing of a valve.

view more

3-pc Threaded Ball Valve

The ball valve is mainly composed of valve body, ball, valve seat, valve stem and transmission device. The closing part of the flange ball valve is a ball. The ball rotates around the center line of the valve body to open and close the valve. The valve can be opened and closed by 90 ° rotation of the valve stem, which is used to close, distribute, adjust the flow and change the flow direction of the medium on the pipeline.

view more

Full PTFE lined wafer butterfly valve

about PTFE lined wafer butterfly valve: PTFE lined wafer butterfly valve is to adapt to some of the strong acid, strong alkali corrosive environment, oil, chemical, food and other special fields. In the conventional butterfly valve and disc lined with FTFE, so that the medium and body isolation, to achieve the effect of anti-corrosive. PTFE lined wafer butterfly valve is used as a component to realize pipeline system and flow control. It has been widely used in many fields such as oil, chemical, metallurgy, and hydropower.

view more

SS wafer butterfly valve

Butterfly valve, is a simple structure of the control valve, can be used for the low pressure pipeline medium switch control of butterfly valve is to close the disc, rotating around the valve shaft to achieve the opening and closing of a valve.

view more

2-pc Threaded Ball Valve

The ball valve has a wide range of pressure and diameter, but its temperature is limited by the seal ring material. Ball valve is divided into fixed ball valve and floating ball valve in structure; In the form of seal is divided into soft seal ball valve, hard seal ball valve and soft hard double ball valve.

view more

wafer butterfly valve with Gearbox

Butterfly valve, is a simple structure of the control valve, can be used for the low pressure pipeline medium switch control of butterfly valve is to close the disc, rotating around the valve shaft to achieve the opening and closing of a valve.

view more

Cast Iron Flange Gate valve

Gate valve is a widely used valve, which is sealed by contacting the valve seat and gate. Usually, the sealing surface will be overlaid with metal materials to increase wear resistance.It can only be fully opened and closed, not adjusted or throttled. There are rigid gate and elastic gate, according to the different gate, gate valve is divided into rigid gate valve and elastic gate valve.

view more

Electric gate valve

What is electric gate valve? Electric gate valve refers to the linear movement of the electric gate valve actuator through electric voltage and signal control to open or close the gate valve.which is mainly divided into an upper part and a lower part. The upper part is an electric actuator, and the lower part is a gate valve.

view more

1-pc Threaded Ball Valve

The ball valve has a wide range of pressure and diameter, but its temperature is limited by the seal ring material. Ball valve is divided into fixed ball valve and floating ball valve in structure; In the form of seal is divided into soft seal ball valve, hard seal ball valve and soft hard double ball valve.

view more

SS wafer butterfly valve PTFE Lined

A butterfly valve with a stainless steel body and disc and PTFE liner makes this valve a cost-effective solution for a wide variety of isolation duties. Manually operated, supplied with a lockable lever or gearbox.

view more

Electric wafer butterfly valve

Butterfly valve, is a simple structure of the control valve, can be used for the low pressure pipeline medium switch control of butterfly valve is to close the disc, rotating around the valve shaft to achieve the opening and closing of a valve.

view more

Q41F Carbon Steel Ball Valve

DIN ANSI 150lb 1/2 inch 4inch 8inch DN15 DN100 DN200 PN16 100PSI WCB Cast Steel Flange Ball Valve The ball valve is mainly composed of valve body, ball, valve seat, valve stem and transmission device. The closing part of the flange ball valve is a ball. The ball rotates around the center line of the valve body to open and close the valve. The valve can be opened and closed by 90 ° rotation of the valve stem, which is used to close, distribute, adjust the flow and change the flow direction of the medium on the pipeline. The ball valve has a wide range of pressure and diameter, but its temperature is limited by the seal ring material. Ball valve is divided into fixed ball valve and floating ball valve in structure; In the form of seal is divided into soft seal ball valve, hard seal ball valve and soft hard double ball valve.

view more

pneumatic PTFE lined wafer butterfly valve

Pneumatic Butterfly Valves are very useful to control highly inflammable liquids like petro-chemicals, Oil, and Gas. It is operated by Pneumatic which allows fast functionality and safe from fire and electric short circuits. So it is an electricity efficient operated valve with the lowest cost.

view more